← All Products

MOUNTING BRACKET

Mount it once. Swap it in minutes.

ROOFTOP WIND-TURBINE MOUNT · STAINLESS · NEMA 4X JUNCTION BOX

Video transcript

Okay, let's talk about mounting, all these products. So we have so many different applications. If you mount a, wind turbine on the beach in a sandy environment, the wind will push the pole over, and we have to do a special, application for that. I'm up here in the mountains of Costa Rica. It's kind of rocky up here, a lot of lava. So you have to drill into the rock. And so there's a whole series of mounting brackets for everything.

If you're, if you're bolting something on a, on a roof, you've got to be able to, to do it up there. Need to be able to get the power in and connect it to whatever device we're working with. So, wind turbines need a way to bolt it down to a fixed location.

If you have, like, these big, buildings that, you know, retail buildings, you know, you want to put them on the, the windmills on the prevailing wall where the wind hits the wall. And when it goes up over the wall, it's like a wing. It gets going faster. So you get more energy when it, when wind hits that big surface. So mounting along the edge of the building is, an application.

So we've got a whole series of mounting branches, bracketry. And you've got to deal with the, the electrical connections, and you've got to deal with the structural load. And then we have to be able to disconnect it. So every turbine has a little clamp, feature, and we put this, this clamp around it. And then when we have to service it, we can just unclamp it, disconnect the electrical wires and take it away. And so it's not a big ordeal to swap things out if there's, you know, damage from a big event, climate event.

So anyhow, this page here, kind of gets you going into what we're doing with, you know, all these different products. You know, when you mount it, you've got to have a junction box where the power goes into the, to the application. So we include that in, in the mounting and all that. So anyhow, this is kind of where we're going with all this. And thank you very much. Have a beautiful day. Paravita, as they say in Costa Rica, have a, have a pure day. Okay, onward. Thank you.

ANEW · Mounting Bracket
Loading 3D model…
Drag to rotate · scroll to zoom

The turbine's home on your roof

Built to hold. Built to let go.

The ANEW Mounting Bracket is how a wind turbine lives on a rooftop. It's made of stainless steel — designed for marine applications, where salt air eats lesser metal — and carries a NEMA 4X junction box for a sealed, weatherproof electrical connection.

The heart of it is the quick-change system: the turbine drops onto the collar and locks. When service is needed, it releases just as fast — install or remove the turbine in minutes, without breaking the electrical enclosure or the roof seal. That's what makes ANEW's ~30-minute field swap possible on a roof.

🌊 Marine-grade stainless 🔌 NEMA 4X junction box 🔄 Quick-change collar 🏠 Rooftop mount

◷ Available Fall 2028

The NEMA 4X Junction Box

Sealed connection, serviceable in the field.

Inside the bracket's junction box: MC4-terminated connections, resettable fusing, and a clear cover — inspect the electrics without opening the seal. Rated NEMA 4X: hose-directed water, wind-driven rain, and corrosion don't get in.

  • NEMA 4X — sealed against weather and corrosion
  • MC4 quick-disconnects — same standard as every ANEW device
  • Fused connections, inspectable through the clear cover
  • Wired once — the turbine swaps without touching the box
ANEW NEMA 4X junction box — clear cover, MC4 ports and fused connections

The Spec Sheet

Every number, in the open.

Structure & Materials

  • TypeRooftop wind-turbine mounting bracket
  • MaterialStainless steel — marine-grade
  • EnvironmentMarine · coastal · hurricane zones
  • MountThrough-bolted rooftop anchor legs
  • InterfaceQuick-change turbine collar
  • Targeted service life50 years

Electrical & Service

  • Junction boxNEMA 4X — sealed, corrosion-resistant
  • ConnectionsMC4 quick-disconnects · fused
  • InspectionClear cover — check without opening
  • InstallTurbine drops on & locks — minutes
  • ServiceQuick-release for ~30-minute field swap
  • FitsANEW wind turbines

Figures shown are design targets; final certified ratings depend on regional certification.

An ANEW water turbine mounted on a home downspout
Mounted where the energy is — a turbine working a rainy-season downspout.

Put wind on the roof.

Available Fall 2028. Size your system on the ANEW tool, or talk to our team.

Roof-mounted ANEW units on the plant, held on angle
Rooftop mounting on the ANEW plant — the same brackets that hold arrays through storm season.

Mounting decides whether a micro-grid keeps generating in weather. Hold the array on angle through wind and rain, and storage plus the grid-tie handle the rest — 24/7 output rather than fair-weather output.

ANEW reference design — architectural rendering generated with Runway.